Here you will find a detailed speed, performance and benchmark test review. Tested was the SATA SSD FX815 PLUTO with 2TB (FX815_2TB) from the brand Fikwot.
| Technical specifications (manufacturer information) | |
| Product image |
|
| Manufacturer | Fikwot |
| Model number | FX815_2TB |
| Capacity | 2048 GB (1908 GiB) |
| pSLC cache | >300 GB approx. |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Interface | SATA 6 Gbps |
| Connector | 2.5" |
| Memory module (NAND) | QLC |
| TBW (Total Bytes Written) | 640 terabyte |
| Controller | Silicon Motion SM2259XT |
v0.567a Drive: 0(ATA) OS: 10.0 build 19045 Model: FIKWOT FX815 2TB Fw : X1021A0 Size : 1953514 MB [2048.4 GB] From smart : [SMI2259XT] [X1021A0 00] [N38B0] Controller : SM2259XA bufferless FlashID: 0x89,0xd3,0xac,0x32,0xc2,0x4,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die Channel: 2 CE : 8 TotDie : 16 Plane : 4 Die/Ce : 1 Ch map : 0x03 CE map : 0xFF Inter. : 8 First Fblock : 2 Total Fblock : 250 Total Hblock : 30524 Fblock Per Ce : 250 Fblock Per Die: 250 Original Spare Block Count : 20 Vendor Marked Bad Block : 0 Bad Block From Pretest : 5
We put the Fikwot SATA SSD through a detailed test. You can find the test result / test report here:
The standard test was performed with a 1 GB file. A total score of 678 points was achieved.
A common everyday scenario is simulated here. Three test folders are created:
The three folders are copied using the Windows copy command (cache remains enabled). The real-world test from 28 April 2025 shows performance during simultaneous write and read operations. The lower the duration, the better.
| AS SSD Copy Benchmark | Transfer rate: | Duration: |
|---|---|---|
| ISO two large files |
988.09 MB/s |
1.09 s |
| Program typical program folder with many small files |
698.33 MB/s |
2.01 s |
| Game a game folder with small and large files |
1,708.27 MB/s |
0.81 s |
Here, speed is measured depending on how compressible the data is.
Similar to AS SSD, two sequential and two random performance tests are carried out here and the write and read speed (manufacturer: 550 MB/s and 500 MB/s) the Fikwot SATA SSD is determined.

| CDM | Read [MB/s] | Write [MB/s] |
|---|---|---|
| SEQ1M Q8T1 |
542.82 |
473.93 |
| SEQ1M Q1T1 |
535.19 |
464.81 |
| RND4K Q32T16 |
231.66 |
182.40 |
| RND4K Q1T1 |
39.30 |
96.49 |
| CDM | Read [IOPS] | Write [IOPS] |
|---|---|---|
| SEQ1M Q8T1 |
517.70 |
452.00 |
| SEQ1M Q1T1 |
510.40 |
443.30 |
| RND4K Q32T16 |
56,558.60 |
44,530.80 |
| RND4K Q1T1 |
9,595.20 |
23,556.90 |
| CDM | Read [µs] | Write [µs] |
|---|---|---|
| SEQ1M Q8T1 |
15,424.10 |
17,635.10 |
| SEQ1M Q1T1 |
1,958.28 |
2,254.37 |
| RND4K Q32T16 |
9,035.05 |
11,477.20 |
| RND4K Q1T1 |
104.07 |
42.33 |
A long-term test was performed to fully utilize the storage. You can see from when a possible cache is full and write performance drops. A test file of 300 GB was written to the medium. The exact cache size could not be determined because the test file did not exhaust (push to the limit) the cache. The test file could at least be read with an average read speed of 516 MB/s and written at 446 MB/s.
HD Tune writes a 1 GB file to the Fikwot SATA SSD. The transfer data of the read speed is displayed graphically. The minimum, maximum and average values are also determined. The measured access time and burst rate are also shown.

Here, a 256 MB file is written to the Fikwot SATA SSD multiple times. The I/O block size varies (from 512 bytes to 64 megabytes). The larger the blocks, the faster writing and reading usually becomes.

Similar to HD Tune, a 500 MB file is written to the Fikwot SATA SSD here. The transfer data is displayed. The more consistent the line, the better. Unfortunately, the tool no longer works correctly from around 4,000 MB/s and no line is displayed (and sometimes incorrect min/max data is shown).

You can find information about the test system at the bottom of the homepage.
As an Amazon Associate I earn from qualifying purchases.