GOODRAM PX600 1TB M.2 SSD
Here you will find a detailed speed, performance and benchmark test review. Tested was the M.2 NVMe SSD PX600 with 1TB (SSDPR-PX600-1K0-80) from the brand GOODRAM.
| Technical specifications (manufacturer information) | |
| Product image | 
|
| Manufacturer | GOODRAM |
| Model number | SSDPR-PX600-1K0-80 |
| Capacity | 1024 GB (932 GiB) |
| pSLC cache | 238 GB approx. |
| Read speed | 5000 MB/s |
| Write speed | 3200 MB/s |
| Interface | PCIe 4.0 x4 |
| Connector | M.2 2280 |
| Memory module (NAND) | QLC |
| DRAM cache | No |
| TBW (Total Bytes Written) | 160 terabyte |
| Warranty | 3 Years |
| Controller | Phison PS5021-E21T |
Compare product Compared to the test winner*
v0.386a OS: 10.0 build 19045 Drive : 0(NVME) Driver : W10(0:3) Model : SSDPR-PX600-1K0-80 Fw : ELFMC1.0 HMB : 65536 - 65536 KB (Enabled, 64 M) Size : 953869 MB [1000.2 GB] LBA Size: 512 AdminCmd: 0x00 0x01 0x02 0x04 0x05 0x06 0x08 0x09 0x0A 0x0C 0x10 0x11 0x14 0x80 0x81 0x82 0x84 0xD0 0xD1 0xD2 0xE0 0xE1 0xE2 I/O Cmd : 0x00 0x01 0x02 0x04 0x05 0x09 Firmware lock supported [03 01] [P103] [0100] Handshake error: 0 Drive unlocked [03 03] F/W : ELFMC1.0 P/N : 511-230823401 Bank00: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Bank01: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Bank02: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Bank03: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Bank08: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Bank09: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Bank10: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Bank11: 0x2c,0xd3,0xc,0x32,0xea,0x30,0x0,0x0 - Micron 176L(N48R) QLC 1024Gb/CE 1024Gb/die Controller : PS5021-E21 CPU Clk : 1000 Flash CE : 8 Flash Channel : 4 Interleave : 2 Flash CE Mask : [++++---- ++++---- -------- --------] Flash Clk,MT : 1600 Die per CE : 1 Block per CE : 3268 Page per Block: 2816 Bit Per Cell : 4(QLC) PMIC Type : PS6103 PE Cycle Limit: 60000/900 SLC cache : 0x600000/0x340000 ONFI : MICRON MT29F1T08GBLCE3W [0AC9] Page size : 18352 (16384+1968) Page/Block: 2816 Block/LUN : 3268 LUN/Chip : 1 Bit/Cell : 4 (QLC) Endurance : 1500 PlanAdrBit: 2 (4 plane)
We put the GOODRAM NVMe M.2 SSD through a detailed test. You can find the test result / test report here:
AS SSD Benchmark
Standard performance test
The standard test was performed with a 5 GB file. A total score of 6208 points was achieved.
Copy performance test
A common everyday scenario is simulated here. Three test folders are created:
- ISO (folder with two large files)
- Program (folder with many small files)
- Game (folder with small and large files)
The three folders are copied using the Windows copy command (cache remains enabled). The real-world test from 24 January 2024 shows performance during simultaneous write and read operations. The lower the duration, the better.
| AS SSD Copy Benchmark | Transfer rate: | Duration: |
|---|---|---|
| ISO two large files |
2,088.23 MB/s |
1.10 s |
| Program typical program folder with many small files |
1,140.23 MB/s |
6.17 s |
| Game a game folder with small and large files |
1,919.36 MB/s |
3.60 s |
Compression performance test
Here, speed is measured depending on how compressible the data is.
CrystalDiskMark Benchmark
Similar to AS SSD, two sequential and two random performance tests are carried out here and the write and read speed (manufacturer specs: 5000 MB/s and 3200 MB/s) the GOODRAM SSD is measured.
| CDM | Read [MB/s] | Write [MB/s] |
|---|---|---|
| SEQ1M Q8T1 |
5,116.12 |
3,911.02 |
| SEQ1M Q1T1 |
2,843.47 |
3,921.50 |
| RND4K Q32T16 |
2,855.13 |
2,909.90 |
| RND4K Q1T1 |
62.69 |
240.33 |
IOPS (Input/Output operations per second)
| CDM | Read [IOPS] | Write [IOPS] |
|---|---|---|
| SEQ1M Q8T1 |
4,879.10 |
3,729.80 |
| SEQ1M Q1T1 |
2,711.70 |
3,739.80 |
| RND4K Q32T16 |
697,054.00 |
710,426.00 |
| RND4K Q1T1 |
15,304.40 |
58,674.30 |
Average latency
| CDM | Read [µs] | Write [µs] |
|---|---|---|
| SEQ1M Q8T1 |
1,637.63 |
2,140.44 |
| SEQ1M Q1T1 |
368.54 |
267.16 |
| RND4K Q32T16 |
732.81 |
719.22 |
| RND4K Q1T1 |
65.21 |
16.92 |
HD Tune Pro long-term test
A long-term test was performed to fully utilize the storage. You can see at what point the cache (if present) becomes full and write performance drops. A test file of 300 GB was written to the medium. After approx. 238 GB, the cache was full and performance was throttled.
The test file could at least be read with an average read speed of 3,273 MB/s and written at 458 MB/s.
HD Tune Pro Benchmark
HD Tune writes a 5 GB file to the GOODRAM NVMe M.2 SSD. The transfer data of the read speed is displayed graphically. The minimum, maximum and average values are also determined. The measured access time and burst rate are also shown.
ATTO Disk Benchmark
Here, a 256 MB file is written to the GOODRAM NVMe M.2 SSD multiple times. The I/O block size varies (from 512 bytes to 64 megabytes). The larger the blocks, the faster writing and reading usually becomes.
SSD-Z Benchmark
Similar to HD Tune, a 500 MB file is written to the GOODRAM NVMe M.2 SSD here. The transfer data is displayed. The more consistent the line, the better. Unfortunately, the tool no longer works correctly from around 4,000 MB/s and no line is displayed (and sometimes incorrect min/max data is shown).
You can find information about the test system at the bottom of the homepage.
As an Amazon Associate I earn from qualifying purchases.