TEST: Lexar NS100 2TB SATA SSD

Here you can find a detailed performance and benchmark test of the SATA SSD NS100 with 2TB (LNS100-2TRB) from Lexar.
Score
710
Price/GB
0,05 €


Technical data
Image NS100
Manufacturer Lexar
Model number LNS100-2TRB
Storage capacity 2048 GB (1908 GiB)
pSLC-Cache >300 GB approx.
Read speed 550 MB/s
Write speed 450 MB/s
Interface SATA 6 Gbps
Connection 2.5"
Memory module (NAND) TLC
TBW (Total Bytes Written) 1000 Terabyte
Controller Marvell 88NV1120
Price ca. 104 USD (= 0,05 $ / GB)
Paid link Buy on Amazon
Compare Product
Compared to the top performer*
Read speed
95 %
Write speed
84 %

*) Test result evaluated according to AS SSD Score within the same size.

AS SSD Benchmark

Standard performance test

The standard test was performed using a 1 GB file. A total score of 710 points was achieved.

AS SSD TEST: Lexar NS100 2TB

AS SSD Read: Write:
Seq
in megabytes per second
496,89 MB/s
435,75 MB/s
4K
in megabytes per second
25,70 MB/s
84,61 MB/s
4K-64Thrd
in megabytes per second
202,00 MB/s
155,74 MB/s
Access time
in milliseconds
0,045 ms
0,141 ms
Score
277
284
Total score
710

Copy Performance Test

A common everyday situation is simulated here. Three test folders are created:

  • ISO (folder with two large files)
  • Program (folder with many small files)
  • Game (folder with small and large files)

The three folders are copied using the Windows Copy command (the cache remains enabled). The practical test of March 31, 2024 shows the performance for simultaneous write and read operations. The lower the duration, the better the performance.

AS SSD TEST: Lexar NS100 2TB
AS SSD Copy-Benchmark Transfer rate: Duration:
ISO
two large files
951,78 MB/s
1,13 s
Program
many small files
1200,97 MB/s
1,17 s
Game
small and large files
1599,75 MB/s
0,86 s

Compression Performance Test

This measures the write and read speed of the Lexar SATA SSD, depending on the compressibility of the data (according to the manufacturer, these should be 550 MB/s and 450 MB/s respectively).

AS SSD TEST: Lexar NS100 2TB

CrystalDiskMark Benchmark

Here, two sequential and two random performance tests are performed, similar to the ones performed on the AS SSD.

CrystalDiskMark Benchmark TEST: Lexar NS100 2TB
CDM Read [MB/s] Write [MB/s]
SEQ1M
Q8T1
526,77
443,74
SEQ1M
Q1T1
504,93
456,98
RND4K
Q32T16
226,23
165,10
RND4K
Q1T1
34,47
92,97

Input/Output operations per second

CDM Read [IOPS] Write [IOPS]
SEQ1M
Q8T1
502,40
423,20
SEQ1M
Q1T1
481,50
435,80
RND4K
Q32T16
55.231,40
40.307,40
RND4K
Q1T1
8.414,30
22.696,80

Average latency

CDM Read [µs] Write [µs]
SEQ1M
Q8T1
15.890,80
18.836,90
SEQ1M
Q1T1
2.076,27
2.293,82
RND4K
Q32T16
9.248,48
12.677,80
RND4K
Q1T1
118,68
43,94

HD Tune Pro Endurance test

This is a long term test to make full use of the memory capacity. You can see when a cache is full and the writing performance decreases. A test file of 300 GB was written to the medium. The exact cache size could not be determined, because the test file did not exhaust the cache (brought it to the limit). At least the test file could be read with an average write speed of 467 MB/s and written with 420 MB/s.

HD Tune Endurance Test TEST: Lexar NS100 2TB

HD Tune Pro Benchmark

HD Tune writes a 1 GB file to the Lexar SATA SSD. The transfer data of the read speed is displayed graphically. The minimum, maximum and average values are also determined. The determined access time and burst rate are also displayed.

HD Tune TEST: Lexar NS100 2TB

ATTO Disk Benchmark

Here, a 256 MB file is written several times to the Lexar SATA SSD. The I/O block size varies (from 512 bytes to 64 megabytes). The larger the blocks, the faster they were written and read.

ATTO Disk Benchmark TEST: Lexar NS100 2TB

SSD-Z Benchmark

Similar to HD Tune, a 500 MB file is written to the Lexar SATA SSD here. The transfer data is displayed. The more constant the line, the better.

SSD-Z TEST: Lexar NS100 2TB


Information about the test system can be found at the bottom of the home page.
As an Amazon Associate I earn from qualifying purchases.