Here you can find a detailed performance and benchmark test.
The the SATA SSD WD Green with 120GB (WDS120G2G0A) from Western Digital was tested.
Technical data | |
Manufacturer | Western Digital |
Type | WDS120G2G0A |
Storage capacity | 120 GB (112 GiB) |
Read speed | 545 MB/s |
Write speed | 500 MB/s |
Interface | SATA 6 Gbps |
Form factor | 2.5" |
Memory module (NAND) | TLC |
DRAM Cache | no |
TBW (Total Bytes Written) | 40 Terabyte |
Controller | Silicon Motion SM2256S |
Price | 50 USD (= 0,42 $ / GB) |
Buy on Amazon |
The standard test was performed with a 1 GB file. Here, a total score of 198 points was achieved.
AS SSD | Read: | Write: |
---|---|---|
Seq in megabytes per second |
503,91 MB/s |
300,24 MB/s |
4K in megabytes per second |
9,30 MB/s |
36,45 MB/s |
4K-64Thrd in megabytes per second |
9,29 MB/s |
33,31 MB/s |
Access time in milliseconds |
0,336 ms |
0,458 ms |
Score | 69 |
100 |
Total score | 198 |
A common everyday situation is simulated here. Three test folders are created:
The three folders are copied using Windows Copy command (the cache remains enabled). The practical test of 19.12.2020 shows the performance for simultaneous write and read operations. The lower the duration, the better.
AS SSD Kopier-Benchmark | Transferrate: | Dauer: |
---|---|---|
ISO two large files |
484,18 MB/s |
2,22 s |
Program many small files |
295,85 MB/s |
4,76 s |
Game small and large files |
1503,27 MB/s |
0,92 s |
Here, the write as well as read speed (according to the manufacturer 545 MB/s and 500 MB/s) the Western Digital SATA SSD is measured depending on the compressibility of the data.
Similar to AS SSD, two sequential and two random performance tests are performed.
CDM | Read [MB/s] | Write [MB/s] |
---|---|---|
SEQ1M Q8T1 |
531,83 |
314,12 |
SEQ1M Q1T1 |
486,83 |
318,33 |
RND4K Q32T16 |
124,62 |
91,82 |
RND4K Q1T1 |
24,14 |
39,92 |
CDM | Read [IPOS] | Write [IPOS] |
---|---|---|
SEQ1M Q8T1 |
507,20 |
299,60 |
SEQ1M Q1T1 |
464,30 |
303,60 |
RND4K Q32T16 |
30.423,80 |
22.418,00 |
RND4K Q1T1 |
5.894,50 |
9.745,80 |
CDM | Read [µs] | Write [µs] |
---|---|---|
SEQ1M Q8T1 |
15.731,70 |
26.580,20 |
SEQ1M Q1T1 |
2.153,16 |
3.291,21 |
RND4K Q32T16 |
16.789,60 |
22.755,70 |
RND4K Q1T1 |
169,48 |
102,43 |
Here a 256 MB file is written several times to the Western Digital SATA SSD. The I/O block size varies (from 512 bytes to 64 megabytes). The larger the blocks, the faster they can usually be written and read.
HD Tune writes a 1 GB file to the Western Digital SATA SSD. The transfer data of the read speed is displayed graphically. The minimum, maximum and average values are also determined. The determined access time and burst rate are also displayed.
Similar to HD Tune, a 500 MB file is written to the Western Digital SATA SSD here. is written. The transfer data is displayed. The more constant the line, the better.
Information about the test system can be found at the bottom of the home page.